Tech Pack and Pattern Ownership: What You Keep When You Switch Factories
- Share
- publisher
- LINENWIND
- Issue Time
- Nov 18,2026
Summary
Who owns the tech pack, the style pattern and the graded nest when a linen program moves factories? This guide separates design intent, documentation and tooling, shows what to name in the contract, lists the handover documents to request, and explains how to recover files you no longer control. MOQ 60 pcs per style per colour, sampling 7-12 days, bulk 25-35 days.

Tech Pack and Pattern Ownership: What You Keep When You Switch Factories
If you paid for the development, you should own the file. That is the principle, but the paperwork decides the outcome. Buyers lose control of tech packs and patterns not because factories steal them, but because nobody wrote down who holds which file, in which format, and under what condition it must be released.
This guide sets out what a tech pack actually contains, which parts are separable, how ownership is normally split between buyer and factory, what a handover checklist should include when you move production, and how to recover documents you no longer control. It is written for brand owners, sourcing managers and founders running linen programs in the 60 to 5,000 piece range, where a single pattern block can carry an entire season.
The Short Answer: Ownership Follows the Paper Trail
In most disputes, the question is not who designed the garment. It is who can produce a document that says so. A tech pack you commissioned and paid for is your work product. A pattern drafted by a factory from your measurements is a grey area unless the contract resolves it. A pattern drafted by a third-party pattern maker belongs to whoever engaged that pattern maker, and only if the engagement agreement says the deliverable transfers.
Three sentences capture the practical rule. First, anything you authored before approaching a factory remains yours by default. Second, anything a factory creates in the course of quoting or producing for you is yours only if the purchase order or development agreement says the deliverables transfer on payment. Third, physical and digital assets held on a factory server stay under factory control until you request them in writing and receive them in a usable format.
That third point is where most switches fail. Buyers assume that because they own the design, they own the DXF, the marker, the graded nest and the print files. Ownership and custody are different things. You can own a file and still have no copy of it. When the relationship ends, custody determines who waits and who ships. If you are still assembling the documentation itself, our guide to tech packs for linen clothing covers what a factory needs before it can quote accurately.
What a Tech Pack Contains, and Which Parts Are Separable
A tech pack is not one document. It is a bundle, and the bundle can be split. Understanding the split matters because factories will often release one part while holding another, and a partial release can leave you unable to reproduce the garment elsewhere.
- Design specification. Flat sketches, front and back views, detail callouts, stitching, topstitch distances. Authored by you, normally transferable without argument.
- Measurement specification. Points of measure, base size measurements, tolerance per point. Authored by you, but frequently revised with factory input, which creates a shared-authorship claim.
- Construction notes. Seam types, seam allowances, hem finishes, interlining, fusible placement. Shared authorship is common here because factories contribute workable methods.
- Bill of materials. Fabric, lining, thread, buttons, labels, packaging. Yours, though supplier contacts inside it may be redacted by the factory as commercial information.
- Pattern and grading. Base pattern, graded nest, marker, seam allowance layers. The most contested item in any handover.
- Print and embroidery files. Artwork, repeat size, colour separations, placement. Yours if you supplied the artwork; licensed if a studio did.
- Colour and trim approvals. Lab dips, strike-offs, bulk approvals. Yours, and valuable because they encode decisions that are expensive to repeat.
The separability matters in negotiations. A factory that refuses to hand over the marker may still hand over the graded pattern. A factory that will not release its internal construction sheet may release the measurement chart and the approved lab dips. Partial recovery is better than none, and it is often enough to redevelop a style in a new factory without repeating every trial.
A fourth category exists that buyers forget: the working history. Correction notes from fit sessions, the reason a shoulder was re-drafted, the fact that a particular linen had to be washed before cutting because the first wash shrinkage sat at 6 percent. That history is not usually in the tech pack. It lives in email and photographs, and it is the difference between a fast redevelopment and a slow one.
Three Layers of Ownership
Ownership questions collapse into three layers, and each has a different default. Design intent is almost always the buyer's. Documentation is negotiable. Physical tooling follows whoever paid for it, which is why the phrase "tooling paid by buyer" needs to appear explicitly in the order confirmation.
| Layer | Typical content | Default holder | What to agree in writing |
|---|---|---|---|
| Design intent | Sketches, artwork, fit direction, colour story, brand identity | Buyer | Factory confirms no reuse of the design for other clients |
| Documentation | Tech pack, measurement chart, construction notes, BOM | Buyer if authored in-house, otherwise disputed | Deliverables transfer on payment of development fee |
| Tooling and files | Patterns, graded nest, markers, cutting dies, screens, embroidery programmes | Whoever paid for them | Copies in native and neutral formats, delivered on request |
| Production knowledge | Sewing sequence, machine settings, pressing parameters, wash recipes | Factory | Documented in the tech pack as a condition of order |
The fourth row is the one buyers undervalue. Production knowledge is genuinely the factory's, and a factory is entitled to protect it. But a buyer is also entitled to a documented process for their own style, because without it the style cannot be audited, duplicated, or improved. The compromise that works in practice is a style-specific process sheet: the factory keeps its general know-how, while the buyer receives the parameters that apply to their garment, such as pressing temperature, wash cycle and machine type.
Patterns, Blocks and Markers: Who Holds the Physical Assets
Pattern ownership is the most misunderstood item in the whole discussion, largely because three different objects get called "the pattern".
- The block. A factory's base pattern for a shirt, dress or trouser, developed over years. This usually belongs to the factory and is licensed to you implicitly for your order. Asking for the block is like asking for the factory's machinery. It is rarely granted, and refusing is reasonable.
- The style pattern. The block modified to your design: your neckline, your drop shoulder, your hem curve. This is developed for your style and should transfer to you, especially if you paid a pattern or development fee.
- The graded nest and marker. The pattern multiplied across sizes and laid for cutting. Grading rules interact with fabric shrinkage and drape, so a linen nest is not simply a scaled copy. This is where factories add the most technical value, and where buyers most often forget to ask.
In linen, the nest deserves specific attention. First-wash shrinkage commonly runs 3 to 7 percent, and the direction is not uniform: warp and weft behave differently. A grade rule built for a stable cotton will produce a garment that fits size M before washing and size S after. That is why a linen program needs the nest delivered with the shrinkage allowance documented, not only the pattern geometry.
What Belongs in the Contract
Ownership clauses fail for a boring reason: they are written in general language and tested in specific disputes. "All intellectual property shall remain the property of the buyer" sounds strong until a factory argues that the pattern, as a tool, is not intellectual property. The fix is a list, not a principle.
| Clause | Weak wording | Wording that works |
|---|---|---|
| Deliverables | Buyer owns all designs | Named list: tech pack, measurement chart, base pattern, graded nest, marker, print files, artwork, lab dip records |
| Trigger | Upon request | Within 5 working days of written request, and automatically on settlement of the development fee |
| Format | In usable form | Native CAD file plus DXF plus 1:1 PDF plot; artwork as vector with fonts outlined |
| Confidentiality | Factory shall keep secrets | No production of the style for any other party, no derivative version with minor changes, for 24 months after last shipment |
| Tooling | Buyer owns tooling | Cutting dies, screens and embroidery programmes paid by buyer are buyer property and are shipped on request at buyer cost |
| Survival | Term applies during the agreement | Ownership and confidentiality survive termination and apply to successors and subcontractors |
The trigger clause is the one that changes behaviour. "Upon request" gives a factory an open-ended timeline. A stated number of working days, combined with an automatic transfer at payment, converts a favour into an obligation. It also removes the awkwardness of asking, which is the real reason most buyers never receive their files.
Two further clauses are worth the negotiation time. For a full clause-by-clause review beyond ownership, see linen manufacturing contracts, and for the confidentiality side specifically, protecting your designs with a linen manufacturer sets out how NDAs and exclusivity interact.
The first addresses subcontracting: if the factory sends your style to a satellite workshop, the confidentiality obligation must travel with it, otherwise your design is protected at one site and unprotected at another. The second addresses derivative work: a supplier that cannot copy your style exactly may still produce "a similar shirt" with your neckline and your pocket placement. Naming derivative versions closes that gap.The Handover Checklist When You Switch Factories
Switching is a project, not an email. The checklist below is ordered so that each step produces something the next step depends on. In practice, a well-prepared buyer completes it in two to three weeks; a buyer starting from scratch needs six to ten.
- Inventory what you already hold. List every file in your own storage: tech packs, measurement charts, fit comments, lab dips, approved samples. Mark each as final or superseded.
- Request the missing originals in writing. Reference the purchase order, name the files, set a date. Ask for native, exchange and plot formats.
- Confirm the pattern's provenance. Was it drafted in-house by the factory, by a freelance pattern maker, or by you? Each answer changes who must authorise release.
- Collect the shrinkage and wash record. Ask for the tested shrinkage by direction, the wash recipe used, and the fabric lot reference. This is the data a new factory needs most.
- Retrieve approved bulk fabric references. Obtain the mill name, article number and a physical swatch of the actual lot used, not a stock card.
- Secure the colour approvals. Lab dips and bulk approval records, with the light source used for assessment noted.
- Photograph the reference sample in detail. Inside seams, hem, collar roll, buttonhole spacing, label placement. Photographs substitute for nothing, but they shorten every conversation.
- Document the construction sequence. Ask for the style-specific operation list, even a handwritten one. It reveals the machine set-up you will need to replicate.
- Verify the pattern against a physical garment. Measure the retained sample and compare with the pattern plot. Discrepancies found now are cheap; found after cutting, they are not.
- Run a fit sample at the new factory before any bulk commitment. Budget one sampling round for pure verification rather than improvement; the sampling rounds guide explains what each round should prove.
- Close the loop with the old factory. Confirm in writing that no further production will occur, and settle any outstanding tooling question.
- Archive everything in one place you control. Version the files, note the date received, and record which sample the version corresponds to.
Five Ways Buyers Lose Control
The failure modes repeat across programs, and none of them require bad faith. They require only that nobody wrote the sentence down.
Development by email. The tech pack evolves across forty messages and no single document is final. When the relationship ends, there is no canonical file to hand over, because none ever existed. The factory's last internal version becomes the de facto master.
The unpaid development fee. A factory that absorbed pattern making as a free service has no contractual trigger to release anything. Payment is leverage, and free development removes it.
The single-format trap. Files arrive as PDFs only. The new factory can see the pattern but cannot edit the grade rules, so the entire nest is rebuilt, and the fit drifts by a centimetre at the hip.
The subcontractor blind spot. Your style was sewn at a second site during peak season. The second site holds a copy of the pattern and owes you nothing, because your contract named only the first.
The rebranded derivative. Six months later, a nearly identical garment appears in a different market. Proving derivation requires the paper trail you did not keep.
Recovering Files You No Longer Control
If the relationship has already ended badly, the sequence below is the one that most often produces results, in order of cost.
- Ask formally, once. A short written request referencing the order number and the development fee paid resolves a surprising share of cases. Factories protect relationships more than files.
- Offer to pay the administrative cost. Retrieval, plotting and courier are real costs. Offering to cover them removes the only legitimate objection.
- Accept a partial release. Measurement chart, construction notes and lab dips are usually releasable even when the pattern is not. They cut redevelopment time substantially.
- Buy back the tooling. Where the factory paid a pattern maker, a modest settlement transfers the file cleanly and permanently.
- Rebuild from a physical sample. Reverse-engineering a retained garment is slower and less precise, but it is always available. Budget one extra sampling round and expect small fit differences.
- Escalate only with evidence. Contract terms, payment records and correspondence decide disputes. Without them, escalation is expensive theatre.
The lesson from recovery cases is consistent: the buyers who recover quickly are the ones who asked early, in writing, while the relationship was still commercial. The buyers who recover slowly waited until after the final shipment, when the factory had no commercial reason to prioritise the request.
Rebuilding From Scratch: Time and Cost
When files are unavailable, a style must be redeveloped. The table below shows what that involves for a typical linen shirt or dress program, using our own sampling windows as the reference point: 7 to 12 days per sampling round, 7 to 14 days when a wash or dye step is added.
| Work item | What it involves | Typical duration | Effect on fit and cost |
|---|---|---|---|
| Pattern re-draft | Digitising from a physical sample, correcting symmetry, rebuilding seam allowances | 3-6 working days | Minor drift at armhole and neckline |
| Grading | Rebuilding grade rules with linen shrinkage allowance | 2-4 working days | Fit risk concentrated at the largest and smallest sizes |
| Fit sample round | One sample per size set, reviewed on a body | 7-12 days | One to two rounds is normal |
| Fabric matching | Re-sourcing the article or an equivalent at the same weight and hand | 3-10 days | Hand-feel change is the most common compromise |
| Colour re-approval | New lab dips against the retained standard | 5-10 days | Small Delta E differences are usually acceptable |
| Wash and shrinkage trial | Confirming the 3 to 7 percent first-wash behaviour on the new lot | 2-5 days | Directly affects final measurements |
Run in parallel, the rebuild is roughly three to four weeks of calendar time before bulk can start. Run sequentially, because the new factory is waiting for decisions, it doubles. On a 25 to 35 day bulk timeline, that delay is the difference between landing in season and landing after it.
There is a cost side too. Development fees are usually modest next to the value of the style, but the real cost is the fabric commitment. Re-sourcing a linen article often means a new minimum from the mill, and if the original fabric was a stock article from a 50 plus specification range, matching it is straightforward; if it was custom woven, the rebuild can require a mill minimum that exceeds your entire order. For the commercial side of small runs, the notes on MOQ, tier pricing and colour splits explain why minimums and file ownership tend to be negotiated together.
Choosing a Factory That Respects Ownership
Ownership behaviour is observable before you place an order. The signals below are visible during quoting and sampling, and they predict how a handover will go two years later. For a wider set of questions, the factory vetting checklist covers what certificates do not tell you.
- They name files without being asked. A factory that lists the exact documents included in a development fee understands deliverables as a category.
- They separate the development fee from the sample fee. Sample fees in the $40 to $150 range, refundable against bulk, are normal; a separate development line item makes the payment trigger explicit.
- They document shrinkage rather than promising it. Ask for the tested first-wash result by direction. A number with a test method attached is a different answer from "about five percent".
- They quote with tolerances. A factory working to AQL 2.5 and stating measurement tolerances per point is already producing the data you will need for a handover.
- They answer the subcontracting question directly. "We sew everything in this building" and "some operations go to a partner unit" are both acceptable answers; silence is not.
- They keep version numbers. If the pattern file for your style is called something other than final_final_2, you are dealing with a documented process.
At Linenwind, development runs on a fixed sequence: technical review within 48 hours, quotation in 3 to 7 working days, sampling in 7 to 12 days, and bulk in 25 to 35 days with first orders typically landing in 35 to 60 days. Style-specific patterns and graded nests produced for a buyer program are released to the buyer on request, with shrinkage and wash parameters documented, because a buyer who can reproduce the garment is a buyer who returns for the next season rather than leaving because they felt trapped.
Questions to Ask Before You Pay a Deposit
Five questions, asked in one email, will tell you more about ownership practice than any clause you negotiate later. Who drafts the pattern, and is that cost inside the sample fee or separate? Which formats can you deliver, native and exchange? What happens to the pattern if we stop ordering? Will the file be released on payment or on request? And has this style, or a version of it, been produced for anyone else?
Answers that arrive quickly and specifically are a good sign. Answers that arrive as reassurance without detail are a signal to put the detail in the purchase order. The point is not to distrust a supplier you have chosen; it is to make the assumption explicit while both sides still benefit from being agreeable. For the commercial side of small runs, the negotiation usually starts with quantities; the same email should settle files, because both are quoted together and the minimum changes once the file list is fixed.
Frequently Asked Questions
Next Step
Ownership is settled at the start or argued at the end, and the cost of settling it early is one page of contract language. If you are preparing a linen program and want the development terms reviewed before you commit, send your tech pack and target quantities through our contact page. Technical review comes back within 48 hours and a costed quotation within 3 to 7 working days, including what files are delivered, in which formats, and on what trigger.
If you are mid-switch and the files are the problem, the same route works: describe what you hold, what is missing, and which style the program depends on.